What are the advantages of XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear?

What are the advantages of XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear?

With the development of the era and the continuous popularization of electricity safety, people's safety awareness has begun to increase. Therefore, many products have appeared that put the protection of people's safety in the first place.
At this stage, high-voltage power transmission and distribution are very common in many areas, so there are certain safety hazards.
The emergence of XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear has solved this problem well.
So, what are the advantages of XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear?

1. Various transmission methods

In the XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear online monitoring system, the temperature of the tap is reliably transmitted by a strap-type temperature sensor through wireless, and the short-circuit current information is transmitted through the optical fiber with a short-circuit current sensor.

2. High degree of intelligence

XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear ‍The detection of cable joint temperature and fault information realizes online non-intrusive detection technology.
Each sensor node on the high-voltage side is electrically isolated from the MCU on the low-voltage side, which overcomes the interference problem of strong electric field and strong electromagnetic radiation in the box. Once there is voltage leakage, line failure and charged status information, it will automatically be online remotely
Monitoring and fault alarm.

3. Better waterproof performance

From the outgoing line to the electric load, the main cable is often used for outgoing. Then when the load is close to the load, the main cable is divided into several small cross-sectional area cables by using the XGN49-40.5 C-GIS gas insulated cabinet metal-clad switchgear.
Cable access load.
The cable holes, reserved holes and gaps at the bottom of the branch box are the main channels for water vapor to enter the box, and as long as they are effectively blocked, the entry of water vapor can be reduced.

In addition, the improvement of the acceptance standard of the branch box can be analyzed from the following aspects. The installation procedure must be strictly controlled. When installing, the integrity of the branch box must be carefully checked to see whether its operating indicators meet the standards. For power supply
The method of operation and the power supply load must be carefully evaluated, and even more so to avoid the phenomenon of breakage.

As an important protective equipment, the quality-guaranteed XGN49-40.5 C-GIS gas insulated switchgear metal-clad switchgear plays a very important role in the use process.

This product better guarantees people's safety, and at the same time reduces safety issues such as life and property caused by high-pressure leakage.